Advance Automation

AC Drives, HMI & PLC Repair

 


SIEMENS PRODUCTS



SIEMENS PRODUCTS

Process analytics play a central role in business success for countless industries. Process analyzers make an essential contribution to process and quality optimization and enable environmentally conscious and sustainable production in virtually every industry segment worldwide.



SINAMICS G


Converters

Pumps, fans, compressors, conveyor belts, mixers, mills or extruders: No matter what application, SINAMICS G converters are perfectly adapted to single drives with basic to mid-level control dynamics requirements. The converters are based on the same platform as all other members of this innovative drives family.



Operator interfaces in IP65 degree of protection


Fully enclosed HMI devices

The SIMATIC HMI PRO (PRO = protected) devices have been designed for mounting on a support arm/pedestal. Thanks to their rugged aluminum enclosures, the SIMATIC HMI PRO devices have all-round IP65 protection and are also suitable for use in harsh environments.
 
As far as functionality and technical specification are concerned the IP65 variants are equal to the corresponding standard devices.
 
The separation of HMI and control cabinet allows flexible design concepts. The new SIMATIC HMI PRO devices are used wherever the HMI device cannot be installed direct in the control cabinet due to restricted space, or whenever an operator unit is required direct at the machine.
 
The devices stand out not only due to their compact and appealing industrial design, but also due to their refined mechanical features. This enables the device to be connected to the support arm system optionally from above or below. A host of support arm systems from well-known manufacturers are supported here. The SIMATIC HMI PRO devices are also suitable for connection to systems in accordance with VESA 75 and VESA 100.


SIMATIC MP 377 15 inch Touch


15 inch Multi Panel with a TFT color touch display

Description

Most versatile Multi Panel of the 370 series with a TFT touchscreen display and a resolution of 1024 x 768 pixels. The MP 377 15” Touch is also available in a model with stainless steel front, as a fully enclosed HMI device with IP65 protection rating and as a customized industry product with daylight-readable display.

Range of application

Like all devices of the 370 series, the MP 377 15” Touch is intended for HMI tasks of higher complexity, and for use in PROFIBUS DP networks or PROFINET environments. In addition to providing HMI standard functionality, the application range can be expanded through the WinCC flexible options Smart Access, Smart Service , OPC Server and Audit. Together with the software-PLC WinAC MP, the MP 377 15” Touch forms a combined platform for control and visualization tasks



SIMATIC HMI IPC477C


Ultra compact rugged and maintenance-free in embedded technology

Particular compact yet high performing Industrial PC in embedded technology with a great variety of operating units. The HMI IPC477C is available an embedded PC-System with pre- installed visualization software WinCC flexible and/or Software PLC WinAC RTX.
 
A new option is to purchase a turnkey device with WinCC client functionality.Based on the HMI IPC 477C there is also a fully enclosed HMI device in order to be mounted directly on a support arm/pedestal. The IP65 rated devices is available with a 15“ or 19“ touch display.
 
Range of application
 
The SIMATIC HMI IPC477C embedded is designed for use directly at the machine, where the focus is on a combination of ruggedness and maximum reliability and the performance and openness of a PC is also required.
 
Due to the minimal mounting depth, it can also be used in confined spaces.


HIGH PERFORMENCE CONVERTERS


HIGH PERFORMENCE CONVERTERS

The flexible converter for positining tasks comprising extensive safety functions
In order to perform the highly complex applications in mechanical engineering and plant construction, machine axes must be quickly positioned in a convenient and exact manner. If you wish to get out the positioning task from the higher-level machine controller, the drive must have this function. This is exactly the task of the SINAMICS S110 with its integrated single positionier (EPos).
 
If you wish to use it as a speed axis, you can predefine setpoint values for the S110 via an analog input or fieldbus interface (Profibus, CAN, Profinet (available soon)). Furthermore, it can activate comprehensive integrated safety functions via on-board safety terminals without complex additional circuits.
 
As a modular single-axis drive with servo functionality, it covers the performance range from 120 W (1AC 230V) to 90 kW (3AC 400V). Preferably synchronous servo motors equipped with encoder, but also induction motors with/without encoder can be operated with SINAMICS S110.


SIMATIC S7-200


SIMATIC S7-200

SIMATIC S7-200 applications range from replacing relays and contactors to handling less complex automation tasks in standalone mode, in networks and within distributed configurations.
 
To save costs, the S7-200 is increasingly being employed in areas that previously required special electronics.
 
In addition to the comprehensive basic functionality of the five available CPUs a wide range of I/O and function modules provides solutions tailored to the customers requirements. (Siemens S7-200).


SIMATIC S7- 300


SIMATIC S7- 300

The SIMATIC S7-300 has been designed for innovative system solutions with the focus on manufacturing engineering, and as a universal automation system, it represents an optimal solution for applications in centralized and distributed configurations: The product range comprises 7 Standard CPUs, 6 Compact CPUs, 6 failsafe CPUs and 2 Technology CPUs. (Siemens S7-300) Highlights
The ability to integrate powerful CPUs with Industrial Ethernet/PROFINET interface, integrated technological functions, or fail-safe designs makes additional investments unnecessary.
The S7-300 can be set up in a modular configuration without the need for slot rules for I/O modules. There is a wide range of modules available both for the centralized and the distributed configuration with ET 200M.
The Micro Memory Card as a data and program memory makes a backup battery superfluous, and with it, part of the maintenance costs. In addition, an associated project, including symbols and comments, can be stored on this memory card to facilitate service calls.
The Micro Memory Card also enables simple program or firmware updates. The Micro Memory Card can be used during operation for storing and accessing data, e.g. for measured value archiving or recipe processing.
In addition to standard automation, safety technology and motion control can also be integrated in an S7-300.
Many of the S7-300 components are also available in a SIPLUS version for external environmental conditions, e.g. extended temperature range (-25 to +60 Deg C) and for use where there is aggressive atmosphere/condensation.


SIWAREX- Weighing Modules


SIWAREX U and CS now supporting PROFINET

PROFINET is a leading standard within the Ethernet based industrial communication. Our weighing electronics SIWAREX U and SIWAREX CS are now supporting this technology. The communication is realized through appropriate Simatic CPUs and communication modules. (7MH4910-0AA01 , 7MH4950-1AA01 , 7MH4950-2AA01 )




Upgrade of SIWAREX U weighing electronics

With the beginning of March 2008 we are offering an updated SIWAREX U, including some interesting improvements. The SIWAREX U is a versatile weighing module for all simple weighing and force measuring tasks. It is either used centrally in a SIMATIC S7-300 or M7 or decentrally linked via PROFIBUS-DP to an S7-400, SIMATIC S5 or systems of other manufacturers. (7MH4910-0AA01 , 7MH4950-1AA01 )




SIWAREX FTA weighing electronics now certified legal-for-trade across the EU

The appropriate certificate for the SIWAREX FTA has been issued in time for the introduction of the new European Measuring Instruments Directive (MID) in Germany. So the SIWAREX FTA has type-approval certificates, which are valid in all 27 countries of the European Union. (7MH4900-2AA01)



SIMATIC S7- 400


SIMATIC S7- 400

The Power Controller for system solutions in the manufacturing and process industries.
Within the Controller family, the SIMATIC S7-400 is designed for system solutions in the manufacturing and process automation.
The product range comprises 9 Standard CPUs, 2 failsafe and 2 high available CPUs. The following features make the SIMATIC S7-400 the most powerful PLC (Siemens S7-400):
 
 
 
The S7-400 is especially suitable for data-intensive tasks in the process industry. High processing speeds and deterministic response times guarantee short machine cycle times on high-speed machines in the manufacturing industry. The high-speed backplane bus of S7-400 ensures efficient linking of central I/O modules.
The S7-400 is used preferably to coordinate overall plants and to control lower-level communications lines with slave stations; this is guaranteed by the high communication power and the integral interfaces.
The power of the S7-400 is scalable thanks to a graded range of CPUs; the capacity for I/O is almost unlimited.
The power reserves of the CPUs enable new functions to be integrated without further hardware investment, e.g. processing of quality data, user-friendly diagnosis, integration into higher-level MES solutions or high-speed communication via bus systems.
The S7-400 can be structured in a modular way without any slot rules; there is a widely varied range of modules available both for centralized configurations and distributed structures.
The configuration of the distributed I/O of the S7-400 can be modified during operation. In addition signal modules can be removed and inserted while live (hot swapping). This makes it very easy to expand the system or replace modules in the event of a fault.
The storage of the complete project data including symbols and comments on the CPU simplifies service and maintenance calls
Safety technology and standard automation can be integrated into an S7-400 controller; the plant availability can be increased by the redundant set-up of the S7-400.
Many of the S7-400 components are also available in a SIPLUS version for external environmental conditions, e.g. extended temperature range (-25 to +60 Deg C) and for use where there is aggressive atmosphere/condensation.


Simatic HMI - Series 77


SIMATIC HMIs

The clever way to start - low cost and innovative
With a familiar look and feel but enhanced functionality the successors of the proven Text Panels OP73 and OP77A & OP77B now offer graphics. The budget-priced devices of the series 70 are suited for smaller HMI applications



Simatic HMI - Series 177

The compact versatile units with comprehensive basic functionality with pixel graphics 6" display for realistic representation of processes (also in color), either as Touch Panels (TPs)or as Operator Panels(OP) with membrane keyboard. Convincing functionality within the compact class as well as graphics capability classify the 177 series devices based on Windows CE.
SIMATIC TP 177A / SIMATIC TP 177B DP mono / SIMATIC TP 177B PN/DP color / SIMATIC TP 177B PN/DP color INOX / SIMATIC OP 177B DP mono / SIMATIC OP 177B PN/DP color


G7 Drive


G7 Drive

This amazing AC drive is the ultimate performance solution with increased speed and torque response to provide servo-like performance from an induction motor in speed, torque, or position control applications. In addition, the G7 has the world's first 480V 3-level inverter architecture that eliminates or minimizes the installation problems associated with IGBT switching (very long cable lengths, bearing currents, and common mode currents) and protects the entire motor-drive system. The G7 can be programmed using DriveWorksEZ™. This is a PC-based, object-oriented, graphical icon, programming tool that is friendly to the user.